Audi S3 8V VCDS Mods

List of VCDS Mods I’ve found for the Audi S3 8V

Auto Dipping Passenger Mirror

============================
Sure, I don’t have the mirror package and I’ve done it.

It’s controller 52-Door Elect, Pass. Byte 4, enable bits 2 and 3.

For it to work when you shift into reverse, the mirror switch must be set to the passenger mirror.

Security Codes
=========
[03] ABS Brakes is 20103
[09] Central Electronics is 31347
[10] Parking aid is 71679
[13] Auto distance regulation is 14117
[44] Steering Assist is 19249
[A5] Frt Sens. Drv. Assist is 20103

Oil Temperature on all DIS Menus
=====================
[17] Instruments
Go to Long Coding
Enable Byte 10, Bit 1. Display Oil Temperature

ACC default distance setting in MMI
======================
[13] Auto distance regulation
Adaptation: Option For Presetting of time gap
Change 0 to 1
Save
Reboot MMI (Menu + Push Touch Knob + Top Right Corner Button)

Disable DRL’s in Light Switch ‘O’ Position
=========================
[09] Central Electronics
Adaptation : (9) Tagfahrlicht-Tagfahrlicht nur in Schalterstellung AUTO
Set Active

Disable DRL’s when handbrake on
=====================
[09] Central Electronics
Adaptation : (5)-Daytime running lights- Tagfshrlicht-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten
Set Active

Autolock when leaving/away from the car
==========================
[05] Access/Start Authorization
Long Coding – 07 -> Long Coding Helper
Byte 2
Enable bit 4

Enable TMC
=======
[5F] Information Electr.
Adaption : Fee-Based Traffic Information (TMC)
New value – 1024
After activating – TP needs to be activated in set-up menu for radio

Acoustic (Alarm Beep) on Lock/Unlock
========================
[09] Central Electronics
Adaptation channels :
(1)-Acknowledgement Signals – Akustische Rueckmeldung entriegen (Un-lock acoustic feedback)
(2)-Acknowledgement Signals – Akustische Rueckmeldung verriegeln (Lock acoustic feedback)
Set each or one of them to Yes

Acoustic Lock Menu in MMI
=================
[09] Central Electronics
Adaptation : Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung
Set Yes

Adjust Switch Off Speed For Parking Plus
==========================
[10] Park/Steer Assist
Adaptation : Switch off speed for parking assist
Change to desired speed (default 10km/h)

Adjustment of the seat heater level lowering time (level 3 to 2)
=======================================
[08] HVAC
Adaptation : Time until heated seat power withdrawel stage 3 to stage 2
Adjust value (default 10min)
(Value 0 = no automatic lowering)

Set number of indicator flashes
===================
[09] Central Electronics
Adaptation : Channel (2) Select Turn signal control Komfortblinken Blinkzyklen
Set 1-5 (default 3)

========================
Passenger drawdown when reversing1. Select STG 52 (T¸relektr. Beifahr.)
2. STG Lange Coding ≠> Function 07
3. Byte 04
4. Enable Bit 2
For it to work when you shift into reverse, the mirror switch must be set to the passenger mirror.

=========================
Deactivation of the wastegate (AGA ≠ valve)1. Select STG 01 (motor)
2. STG coding ≠> function 07
3. Byte 9
4. Disable Bit 2
=========================
Rear DRL

Module 09 Central Electronics
Adaption – 10
(9) Leuchte23SL HLC10 light function D23 – New Value – Daytime Running Lights
(9) Leuchte24SL HRA65 light function D24 – New Value – Daytime Running Lights
(9) Leuchte26NSL LA72 light function D26 – New Value – Daytime Running Lights
(9) Leuchte27NSL RC6 light function D27 – New Value – Daytime Running Lights

============================

Sound actuator
Go to A9 Struct. Borne Sound
Adaptation 10
Select “Channel of structure borne sound actuator” (only one)
Std value 100% Change to the value you want, stored in %
============================
Rain closing windows
Go to [09] Central Electronics
Go to Secuity Access and enter 31347
Go to adaptation channels and set the following:
– (15) Access Control 2 – Regenschliessen_ein aus (Rain Closing on / off) – Select Active
– (16) Access Control 2 – Regenschliessen_art (Rain closing Type) set to Permanent
– (28) Access Control 2 – Menuesteuerung Regenschliessen (Menu Control Rain close) ñ Set to Active (enables the menu in the ifotainment screen)
THEN
9 Central Electronics
Rain and light sensor
Byte 0ÖEnable Bit 2 ìRegenschliessen aktivî. (rain closing active)
Bit 1 should be active tooÖ.Regenlicht aktiv (rain light active)
My Old codingÖ..00A8DD
My New codingÖ.06A8DD
===============================
Automatic Air Recirculation….this places the option in the AC setting on the nav screen.
08 Auto HVAC
Long coding
Byte 4
Bit 4-5 use drop down box and select ì10 Recirculation Air settings (after ignition cycle) stored.
==============================
Rain closing windows
Go to [09] Central Electronics
Go to Secuity Access and enter 31347
Go to adaptation channels and set the following:
– (15) Access Control 2 – Regenschliessen_ein aus (Rain Closing on / off) – Select Active
– (16) Access Control 2 – Regenschliessen_art (Rain closing Type) set to Permanent
– (28) Access Control 2 – Menuesteuerung Regenschliessen (Menu Control Rain close) ñ Set to Active (enables the menu in the ifotainment screen)
THEN
9 Central Electronics
Rain and light sensor
Byte 0ÖEnable Bit 2 ìRegenschliessen aktivî. (rain closing active)
Bit 1 should be active tooÖ.Regenlicht aktiv (rain light active)
My Old codingÖ..00A8DD
My New codingÖ.06A8DD